Installation and Operation of Spiral Classifier
author:dahua time:2017-02-16
Installation of spiral classifier
The machine can be installed without damage and the bolts are tightened. The spiral classifier must be installed on the strong concrete foundation.
Operation of spiral classifier
After the spiral body moving, the operator can feed the pulp and increase the feeding amount gradually.
Stop the machine during working condition in the cases that the machine is blocked or overload. Lift the spiral body from the pulp, and open the valve to prevent silt up.
When restart the machine, drop the spiral body to a certain position, and then turn the spiral body.
If need to stop the machine, firstly stop feeding, and then stop the machine until the materials are classified and discharged.
Previous Article:How many Categories do Mechanical Vibrator have?
Next Article: Why Complex Sand Maker cannot be used for Pebble Crushing?