In the actual production, the output of sand making machine is related to many factors, such as: hardness of material, humidity, fineness of finished sand, equipment maintenance and equipment quality, etc. Here are the factors that affect the output of the sand making machine.

First, Different crushing materials

Different materials hardness, viscosity, humidity and so on will have a certain difference, sand machine in the crushing of the sand output according to the different broken materials will also be different. The details are as follows:

1. Viscosity of materials

Materials with high viscosity will stick to the inner wall of the sand making chamber in the sand making machine. If not cleaned in time, it will seriously affect the working efficiency of the sand making machine and even affect the normal work of the sand making machine. Therefore, the selection of materials must pay attention to the material viscosity cannot be too big.                    

2. Material composition

The more fine powder contained in the material, the more it will affect the sand making, because these fine powder are easy to adhere to affect the delivery. Therefore, the material with a large amount of fine powder should be screened once in advance, and the fine powder should be screened from the material as far as possible, so as not to affect the work of the sand making machine.

3. Material humidity

When the material is broken in the sand making machine, if the water content of the material is high, it is easy to adhere to the material, and it is also easy to block in the conveying process, resulting in the reduction of sand making output.

Firstly, the humidity of materials should be strictly controlled when material is selected. If the humidity of materials is too high, the moisture in materials can be reduced by sunshine or air drying.

4. Hardness of materials

The harder the material is, the more difficult it is to sand and the more severe the wear and tear on the equipment. This indicates that the material selection to choose moderate hardness.

Second, Fineness of finished sand is different

The higher the fineness requirement is, the finer the finished material is, and the smaller the sand making capacity is. This is related to the needs of sand users, the general material fineness can be fine.                     

Third, Difference of model number of sanding machine

Each manufacturer produced sand model has a certain difference, different types of equipment in the operation of sand output; energy consumption is not the same. Users should have some understanding of their own production when purchasing equipment, and purchase the appropriate sand making machine, otherwise it will not only affect the output, but also may make users spend more cost.

Forth, whether the standard operation, regular operation

Standard operation regular maintenance of sand machine is very important, but also affects the amount of sand production equipment. If the sand machine in the operation of the operation is not standardized and do not do regular maintenance, it will cause wear and tear of wearing parts, so that the life of the equipment greatly reduced, and small output.